Rail/Switch Operator Plant

Summary: This position is primarily responsible for the movement of SOP, Salt, and MgCL2 products. Assist the Shuttlewagon Operator in the spotting, staging and preparation of rail cars in line with daily shipping and/or unloading requirements. This is accomplished through the safe and efficient work habits and effective coordination with the shuttlewagon operator, weigh master and/or plant operator. Is also responsible for the inspection, cleaning, and general care of assigned areas including tracks, cars, and associated equipment. Position responsibilities vary considerably between Salt Plant operations and SOP Loadout operations.

Essential Duties and Responsibilities include but are not limited to the following: (Management reserves the right to add or modify the duties and responsibilities at any time.)

- Equipment Inspection– Inspects rail cars for proper loading requirements (cleanliness) and discernible car integrity before loading and unloading processes begin.

- Moving Rail Cars– Works in conjunction with the shuttlewagon operator in the inspection and readiness of coupling devices for proper alignment during coupling and decoupling process.

- Prior to moving the car(s) removes chocks, connects air brake hoses, disengages hand brakes, and inspects track for obstacles and proper switch placement.

- Follows all safety procedures and keeps the Shuttlewagon operator informed of potential safety hazards that may occur while spotting during rail car pushes.

- Communicates the aforementioned and coupling and decoupling progress via radio to track mobile operator.

- Placement of Rail Cars– Know clearance points, proper communication for “counting down” to a couple, and proper setting of hand brakes on cars prior to the uncoupling process.

- Other Functions- Serves as the back-up for the Shuttlewagon Operator as required to cover vacation, absences and other relief issues.

- Provides clean up on tracks.

- Responds to problems or production needs under the silos and communicates resolutions via radio to the weigh master.

Deliverables:

- Preparation and Inspection of rail cars as measured by inspection by either Supervisor, Weigh Master, or Brine Loader

- - Cars are cleaned not to exceed 30 minute maximum.

- Void of contamination per pre-loading routine inspection

- Free of defects as per pre-loading inspection and rail car functionality

- No Violations of rail car safety as per routine inspection

- - No equipment damage to rail cars, shuttlewagon, and/or derails from debris or improperly set derailers.

- No unsecured movements of rail cars

- No injuries

- No error in required track inquires as measured by Customer Service feedback, QSI, or Supervisor review

- - Car count correct.

- Car numbers correspond with actual car string.

- Report reflects car placement on proper track.

- No additional charges from railroad due to inaccurate placement of railcar.

- Inquiries completed and turned in no later than 0700.

Qualifications - External

Qualifications: To perform this job successfully, an individual must be able to carry out each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required and should be considered the minimum standard. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Education and Experience: Must have a high school diploma and previous experience or education demonstrating the ability to monitor equipment for proper operation and perform tasks related to maintaining product quality. Previous experience operating heavy equipment or working with rail equipment is a plus.

Computer Skills: To perform this job successfully, an individual must be PC literate and proficient with Excel, Word, Outlook, and Access to analyze and communicate information. Must be able to navigate an ERP to issue work requests and review inventory.

Competency:

To perform the job successfully, an individual should demonstrate the following competencies:

Interpersonal Skills - Ability to interact effectively with others and work effectively as a member of a team.

Written Communication - Concise, complete, and well organized written communications are essential

Planning/Organizing - Must be able to plan and organize a schedule that is conducive to position duties. Must have the ability to independently and effectively plan, organize, coordinate, and follow up on assignments. Must be able to remain on task in a disruptive setting. Must be able to organize in conjunction with multiple directions from Weigh Master or Plant Operator.

Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration, regardless of their status or position; Follows through on commitments.

Quality – Able to follow communicated/trained quality procedures. Able to recognize and resolve issues affecting product quality. Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality.

Language Skills: The abilities listed are representative of the level of competency the incumbent needs in order to effectively perform the essential duties. These specific abilities are required for this particular position.

Ability to communicate clearly with coworkers to ensure Safety. Ability to read, analyze and interpret job-related information. Able to complete reports/logs accurately, in an understandable manner, and legibly.

Mathematical and Reasoning Ability and Skills: The ability to perform lower-level math functions. Ability to collect and accurately assemble data in a logical manner.

Essential Job Functions: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel, and talk or hear. The employee is also required to stand; walk; reach with hands and arms and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 50 pounds.

Compass Minerals is an equal opportunity and affirmative action employer. We are firmly committed to making all employment-related decisions without regard to race, ancestry, ethnicity, color, religious creed or belief, national origin, sex (including sexual orientation, gender identity, and pregnancy and breastfeeding), age, military or veteran status, status as a qualified individual with a disability, genetic information, and any other characteristic protected by law. To request reasonable accommodations, email careers@compassminerals.com or call 913-344-9200. Learn more about equal employment opportunity laws at dol.gov.

Internal Description

Description - Internal

We invite you to Explore the Potential of being part of something Clearly Essential!

Compass Minerals (NYSE: CMP) is a leading global provider of essential minerals focused on safely delivering where and when it matters to help solve nature’s challenges for customers and communities. The company’s salt products help keep roadways safe during winter weather and are used in numerous other consumer, industrial, chemical and agricultural applications. Its plant nutrition products help improve the quality and yield of crops while supporting sustainable agriculture. Compass Minerals operates 12 production and packaging facilities with more than 1,800 employees throughout the U.S., Canada and the U.K. Visit compassminerals.com for more information about the company and its products.

Summary: This position is primarily responsible for the movement of SOP, Salt, and MgCL2 products. Assist the Shuttlewagon Operator in the spotting, staging and preparation of rail cars in line with daily shipping and/or unloading requirements. This is accomplished through the safe and efficient work habits and effective coordination with the shuttlewagon operator, weigh master and/or plant operator. Is also responsible for the inspection, cleaning, and general care of assigned areas including tracks, cars, and associated equipment. Position responsibilities vary considerably between Salt Plant operations and SOP Loadout operations.

Essential Duties and Responsibilities include but are not limited to the following: (Management reserves the right to add or modify the duties and responsibilities at any time.)

- Equipment Inspection– Inspects rail cars for proper loading requirements (cleanliness) and discernible car integrity before loading and unloading processes begin.

- Moving Rail Cars– Works in conjunction with the shuttlewagon operator in the inspection and readiness of coupling devices for proper alignment during coupling and decoupling process.

- Prior to moving the car(s) removes chocks, connects air brake hoses, disengages hand brakes, and inspects track for obstacles and proper switch placement.

- Follows all safety procedures and keeps the Shuttlewagon operator informed of potential safety hazards that may occur while spotting during rail car pushes.

- Communicates the aforementioned and coupling and decoupling progress via radio to track mobile operator.

- Placement of Rail Cars– Know clearance points, proper communication for “counting down” to a couple, and proper setting of hand brakes on cars prior to the uncoupling process.

- Other Functions- Serves as the back-up for the Shuttlewagon Operator as required to cover vacation, absences and other relief issues.

- Provides clean up on tracks.

- Responds to problems or production needs under the silos and communicates resolutions via radio to the weigh master.

Deliverables:

- Preparation and Inspection of rail cars as measured by inspection by either Supervisor, Weigh Master, or Brine Loader

- - Cars are cleaned not to exceed 30 minute maximum.

- Void of contamination per pre-loading routine inspection

- Free of defects as per pre-loading inspection and rail car functionality

- No Violations of rail car safety as per routine inspection

- - No equipment damage to rail cars, shuttlewagon, and/or derails from debris or improperly set derailers.

- No unsecured movements of rail cars

- No injuries

- No error in required track inquires as measured by Customer Service feedback, QSI, or Supervisor review

- - Car count correct.

- Car numbers correspond with actual car string.

- Report reflects car placement on proper track.

- No additional charges from railroad due to inaccurate placement of railcar.

- Inquiries completed and turned in no later than 0700.

Qualifications - Internal

Qualifications: To perform this job successfully, an individual must be able to carry out each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required and should be considered the minimum standard. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Education and Experience: Must have a high school diploma and previous experience or education demonstrating the ability to monitor equipment for proper operation and perform tasks related to maintaining product quality. Previous experience operating heavy equipment or working with rail equipment is a plus.

Computer Skills: To perform this job successfully, an individual must be PC literate and proficient with Excel, Word, Outlook, and Access to analyze and communicate information. Must be able to navigate an ERP to issue work requests and review inventory.

Competency:

To perform the job successfully, an individual should demonstrate the following competencies:

Interpersonal Skills - Ability to interact effectively with others and work effectively as a member of a team.

Written Communication - Concise, complete, and well organized written communications are essential

Planning/Organizing - Must be able to plan and organize a schedule that is conducive to position duties. Must have the ability to independently and effectively plan, organize, coordinate, and follow up on assignments. Must be able to remain on task in a disruptive setting. Must be able to organize in conjunction with multiple directions from Weigh Master or Plant Operator.

Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration, regardless of their status or position; Follows through on commitments.

Quality – Able to follow communicated/trained quality procedures. Able to recognize and resolve issues affecting product quality. Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality.

Language Skills: The abilities listed are representative of the level of competency the incumbent needs in order to effectively perform the essential duties. These specific abilities are required for this particular position.

Ability to communicate clearly with coworkers to ensure Safety. Ability to read, analyze and interpret job-related information. Able to complete reports/logs accurately, in an understandable manner, and legibly.

Mathematical and Reasoning Ability and Skills: The ability to perform lower-level math functions. Ability to collect and accurately assemble data in a logical manner.

Essential Job Functions: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel, and talk or hear. The employee is also required to stand; walk; reach with hands and arms and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 50 pounds.

Compass Minerals is an equal opportunity and affirmative action employer. We are firmly committed to making all employment-related decisions without regard to race, ancestry, ethnicity, color, religious creed or belief, national origin, sex (including sexual orientation, gender identity, and pregnancy and breastfeeding), age, military or veteran status, status as a qualified individual with a disability, genetic information, and any other characteristic protected by law. To request reasonable accommodations, email careers@compassminerals.com or call 913-344-9200. Learn more about equal employment opportunity laws at dol.gov.

Equal Opportunity Employer

This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.