DTE Energy

I&E Technician

LocationMarshall, MI
Job TypeFull-time

About This Job

DTE is one of the nation’s largest diversified energy companies. Our electric and gas companies have fueled our customer’s homes and Michigan’s progress for more than a century. And as Michigan’s largest source of renewable energy, we’re creating a cleaner, healthier environment to power our future. We’re also serving communities beyond Michigan, where our affiliated businesses offer renewable energy, emission control technologies, and energy services to industries in 19 states. But we’re more than a leading energy company... and working at DTE is more than just a job. At DTE, we take great care of each other and our customers, and we use our energy to be a force for growth and prosperity in our communities. When you join us, you’ll be part of a team that welcomes, recognizes, and celebrates differences, and values everyone’s health, safety, and wellbeing. Are you ready to make that kind of difference? Bring your energy to DTE. Together, we can achieve great things.


Job Summary


Location: Marshall, MI

This position is responsible for installing, maintaining, testing, and troubleshooting instrumentation, controls, and electrical/electronic systems within the newly constructed Central Utility Plant (CUP) and related auxiliary equipment around Ford’s BlueOval Battery Park Michigan complex located in Marshall, MI; along with the associated distribution infrastructure needed to supply utility services to BlueOval Battery Park Michigan. This is a “journeymen” level position with a high degree of knowledge of instrumentation, controls, low and medium voltage switchgear, transformers, generators, protective relays, and motor control centers. Work is performed under direct supervision of site management and performance is reviewed against an established set of goals and Company policies and procedures.

Plant equipment includes the following: (2) 7.8 MW Solar Taurus 70 Gas Turbine Generators with associated Rentech 160 KPPH Heat Recovery Steam Generator’s with Duct Burners and Fresh Air Firing capability, (2) 14,000 MBH Hot Oil Heaters, (4) 25,000 MBH, steam-to-hot water heat exchangers, economizers, deaerators, boiler feed water pumps, and condensate pumps. Also included is a 14,450 ton modular chilled water plant with an associated 15-cell, 48,000-gpm modular cooling tower. Balance of plant equipment includes air compressors, water treatment systems, pumps, filters, instrumentation, PLC controls, electrical systems (15/5 kV, 480 V and 125 VDC), and associated distribution infrastructure for the above.

Work involves performing some difficult and complex functions requiring a high level of independent judgment, initiative, and discretion.


Key Accountabilities

Calibrate, test, maintain, troubleshoot, and install all plant instrumentation, control systems and electrical equipmen
Perform maintenance on motor control centers, motor operated valves, generators, excitation equipment and motors
Perform preventive, predictive, and corrective maintenance on equipment, coordinating work with various team members
Troubleshoot and perform maintenance on DC backup power equipment, process controls, programmable logic controls (PLC) and emission monitoring equipment
Update and maintain Computerized Maintenance Management System (CMMS) to record time and material used, problems identified/corrected and further action required to preserve complete history of maintenance on equipment
Train other team members in the areas of instrumentation, control, and electrical systems
Perform equipment and system tagging in accordance with company and plant rules and regulations
Participate in small construction projects
Read and interpret drawings, sketches, prints and specifications as required
Order parts as needed to affect maintenance and repair
Schedule, coordinate, monitor and work with contractors on specific tasks as required
Comply with all site safety and environmental requirements and procedures
Perform operations in accordance with standard operating procedures (SOP’s) and prudent safety standards
Participation in the basic safety processes as key member of the Site Safety committee, leading monthly safety meetings and having a shared responsibility for the site's overall safety performance
Identify safety hazards and take corrective actions as necessary
Perform plant electrical switching and lock-out/tag-out (LOTO) of equipment in accordance with approved procedures and prudent operations and maintenance best practices
Develop, assist, and revise operations and maintenance related procedures to ensure optimal performance of systems
Perform and maintain plant housekeeping duties
Perform other duties as assigned
Communicate pertinent information to company personnel, customers and vendors
Assist other team members and works with all departments to support corporate and plant goals
Work scheduled and unscheduled overtime and respond to off-hour call-ins as needed
Leads and participates in assigned continuous improvement efforts throughout the facility


Minimum Education & Experience Requirements

Must have a high school diploma or GED and at least 5 years of power plant experience in instrument, controls, and electrical maintenance. Must have knowledge of utility plant mechanical and electrical equipment, including gas turbines, HRSG’s, motors, pumps, mechanical chillers, fluid systems, chemical handling, water treatment systems, pollution control equipment, AC/DC electrical distribution, control systems, and associated maintenance functions.


Other Qualifications

Experience with natural gas fired combustion turbines, heat recovery steam generators (HRSG), electrical systems, chilled water systems, compressed air, water softeners and emissions control systems
Demonstrated knowledge of electrical equipment, electronics, schematics, controls, and instrumentation
Demonstrated ability to calibrate I&C systems and equipment, including analytic equipment
Demonstrated ability to configure and operate various test instruments and equipment as necessary to troubleshoot and repair plant equipment including, but not limited to PLC’s, variable frequency drives, motor control centers, transformers, and generators.
Demonstrated experience with Allen Bradley PLC interfaces
Ability to coordinate and work with others in a team environment
Ability to learn and become proficient in all site-specific systems and sub-systems
Ability to complete site-specific qualification training and periodic testing
Knowledge of plant safety policies, and procedures, especially in areas such as chemical handling, energy systems, confined spaces, fire suppression, and first aid
Knowledge of and ability to understand fundamental principles related to physics, mathematics, AC/DC electrical theory, heat transfer, fluid flow, thermal dynamics and chemistry
Ability to use basic hand tools, portable electric, pneumatic tools, and basic rigging equipment such as winches, hoists, and slings
Ability to locate, troubleshoot, and correct problems with mechanical and electrical system and ancillary equipment
Ability to effectively communicate verbally and in writing
Experience with Computerized Maintenance Management System (CMMS)
Proficient in Microsoft Office applications (Word, Excel, PowerPoint, and Outlook)


Physical Demands & Working Conditions


Required

The physical demands characterized here epitomize those that must be met by an employee to properly perform the integral functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. In order to properly perform the integral functions of this job, the employee is required to:

Frequently stand, walk, or climb and occasionally stoop, kneel or crawl.
Talk and hear; use hands to finger, handle or feel; and reach with hands and arms extensively.
Frequently lift objects of up to 35 pounds in weight. Occasionally lift or move objects up to 50 pounds in weight, and occasionally push or pull objects up to 70 pounds in weight.
Possess the following vision requirements: close, color, and the ability to adjust focus.
Occasionally be exposed to outside weather conditions, including extreme heat/cold, wet and/or humid conditions.
Occasionally be exposed to fumes or airborne particles and vibration.
Regularly be exposed to moving mechanical parts and/or machinery.
Be in a work environment that is usually loud.


Additional Information

Incumbents may engage in all or some combination of the activities and accountabilities, and utilize a variety of the competencies cited in this description depending upon the organization and role to which they are assigned. This description is intended to describe the general nature and level of work performed by incumbents in this job. It is not intended as an all-inclusive list of accountabilities or responsibilities, nor is it intended to limit the rights of supervisors or management representatives to assign, direct and control the work of employees under their supervision.


PRIVACY NOTICE TO CALIFORNIA JOB APPLICANTS

At DTE Energy, we are committed to providing an inclusive workplace where everyone feels welcome and a sense of belonging. We seek individuals with a heart for service, a passion to help our communities prosper, and ideas to help shape the future of energy. We are proud to be an equal opportunity employer that considers all qualified applicants without regard to race, color, sex, sexual orientation, gender identity, age, religion, disability, national origin, citizenship, height, weight, genetic information, marital status, pregnancy, protected veteran status or any other status protected by applicable federal and/or state laws.

Trending Jobs

company-logo

Nuclear Technical Intern - Mid Atlantic

Constellation
Job TypeInternship
 
Lusby, MD
24 days ago
company-logo

Apprentice Lineman

Brink Constructors, Inc.
Job TypeFull-time
 
Rapid City, SD
23 days ago
company-logo

Deckhand (Houston)

John W. Stone Oil Distributor, LLC
 
Houston, TX
24 days ago
company-logo

Electrical Engineer

Dudley Staffing
Job TypeFull-time
Salary
$55 - $75
Canonsburg, Pennsylvania
3 months ago
company-logo

Director, Financial Planning & Analysis - Energy (Enterprise)

Pilot Thomas Logistics
Job TypeFull-time
 
Grapevine, TX
24 days ago
company-logo

Quality Engineer

Jedco Inc.
Job TypeFull-time
 
Grand Rapids, MI
18 days ago
company-logo

Solar Electrician

MN8 Energy
Job TypeFull-time
 
California, United States
22 days ago
company-logo

Sr. Polymer Scientist

ExxonMobil
Job TypeFull-time
 
Baytown, TX
22 days ago
company-logo

Gas Foreman

Peak Utility Services Group
Job TypeFull-time
 
Lawton, OK
23 days ago
company-logo

Apprentice Lineman I

San Patricio Electric Cooperative, Inc.
Job TypeFull-time
 
Sinton, TX
8 days ago
company-logo

Apprentice Line Worker I

Tampa Electric
Job TypeFull-time
 
Ruskin, FL
30 days ago
SD

Service Manager

Supertech Diesel Truck Specialists
Job TypeFull-time
 
Langley, BC
21 days ago
company-logo

Finishing Helper Entry Level- Dayshift

Bonnell Aluminum
Salary
$41600 - $41600
Carthage, TN
18 days ago
company-logo

contract landman

HPS Oil & Gas Properties
Job TypeFull-time
 
Lafayette, Louisiana
about 2 months ago
company-logo

Meter Technician

ONEOK
Job TypeFull-time
 
Odessa, TX
24 days ago
SD

Service Manager

Supertech Diesel Truck Specialists
Job TypeFull-time
 
Nanaimo, BC
21 days ago
company-logo

Apprentice Power Lineman

Proline Power Corp.
Job TypeFull-time, Apprenticeship
 
Red Deer, AB
28 days ago
company-logo

Assembler/Production

Uptalent
Job TypeContract
Salary
$37440 - $49920
Oklahoma City, OK
17 days ago
company-logo

Senior Landman

Greenlake Energy
Job TypeFull-time
 
Austin, Texas
15 days ago
company-logo

Senior Investigator

Dominion Energy
Job TypeFull-time
 
Norfolk, VA
24 days ago