Texas New Mexico Power

Engineer III - IV (SCADA)

LocationAlvin, TX
Job TypeFull-time

About This Job


PREFERENCES

Ability to install, maintain, and test upgraded database software and to recover/restore data
Ability to write, review and maintain technical documents such as database process documents, procedures and other ERCOT and NERC compliance documentation relative to operational data requirements
Ability to design logical and physical SCADA databases or reviews description of changes to the database design
Ability to establish physical database parameters related to new or existing RTU installations within TNMP transmission and distribution monitored facilities
Experience coding database descriptions and specifies identifiers of database-to-database management system
Ability to synthesize complex or diverse information, collect and research data, and design workflows and procedures
Experience resolving SCADA data irregularities between Communications, Engineering and System Operations
Experience creating, testing, and correcting errors and to SCADA database and System Operator displays using ERCOT protocols
Ability to perform EMS configuration tasks that support control center functionality enhancements
Demonstrated high level organizational ability to effectively coordinate and manage data requirements that are exchanged internally and between other utilities and regulatory entities

Ability to implement and tests changes to ICCP database in accordance with ERCOT protocols, guides and procedures. Monitors and resolves ICCP data irregularities between ERCOT and System Operations


JOB DESCRIPTION

Personnel in this job title may be covered by NERC CIP cyber security standards. If the position is covered, prior to being hired, promoted, or transferred into the position, the candidate must successfully pass a Personnel Risk Assessment, which includes identity verification and a criminal background check. Prior to being granted unescorted access to cyber secure areas, the candidate must attend cyber security training. Annual cyber security training is also required.

Given the financial nature of this position, this position may be required to obtain a credit check depending on location. If the position is covered, prior to being hired, promoted, or transferred into the position, the candidate must successfully pass a credit background check.

SUMMARY:

Under general supervision plans, schedules, conducts, and coordinates the engineering work for a total project of moderate scope or for detailed phases of part of a major project.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Manages engineering aspects of projects of moderate scope or detailed phases of major project efforts

Leads or conducts performance, cost, and scheduling studies of varying size that are generally conventional in nature
Supports operational areas through the application of standard and non-standard engineering techniques, practices, and procedures
Communicates engineering ideas, recommendations, and evaluations to diverse internal groups in a working or conference type environment
Represents the company's interests in engineering matters that may be varied and complex in nature
Interacts with and provides broad knowledge technical support to other associates
Applies engineering expertise to improve or develop new standards
Provides technical direction and/or activity supervision to contractors and company personnel on a regular, on-going basis


COMPETENCIES:

Broad knowledge and proven ability to apply engineering principles, practices and regulations to, and perform economic and decision analysis studies of issues in areas including, but not limited to, generation, transmission, distribution, system planning, financial and regulatory issues, asset utilization, and environmental controls and regulations
Ability to read, interpret and apply national, state and local codes and standards (IEEE, ANSI, NEC, NESC, ACI, AISC, ASME, NACE, etc.)
Ability to translate electrical theory and physics to utility application for improving system reliability
Ability to make informed repair decisions following company protocols
Comfortable working in and around high voltage (up to 345kV) electrical facilities and equipment
Ability to forecast budgets
Demonstrated leadership skills, self-motivation, and interpersonal skills

QUALIFICATIONS

MINIMUM EDUCATION AND/OR EXPERIENCE:

Bachelor's Degree in Engineering from a college/university accredited by the Accreditation Board for Engineering and Technology, Inc. (ABET), plus four or more years of engineering experience or three or more with a Fundamentals of Engineering certificate or three or more with a Master's Degree in Engineering.


CERTIFICATES, LICENSES, AND REGISTRATIONS

Fundamentals of Engineering certificate is preferred.

Must possess current, legally valid driver's license and meet the Company's driving record requirements.


COMMUNICATION SKILLS:

Ability to read and interpret documents
Ability to write routine reports and correspondence, write speeches, and presentations
Ability to speak effectively before groups of customers, employees, and managers of the organization


COMPUTER SKILLS:

In-depth knowledge of personal computers including demonstrated proficiency with electrical engineering design programs
In depth knowledge of word processing, database, and spreadsheet software


ANALYSIS AND PROBLEM-SOLVING ABILITY:

Ability to apply common sense understanding to carry out complex instructions furnished in written, oral, or diagram form. Ability to deal with complex problems involving several concrete variables in complicated situations.


PHYSICAL DEMANDS:

This position requires periods of frequent sitting, standing, walking, and exposure to outside elements, lifting (50 pounds or under), crouching, bending, climbing and working at various heights.
Protective equipment required: hard-hat, safety glasses and hearing protection.


WORK ENVIRONMENT:

Time will be divided between office and field, with a majority of time in the office. Work will be around high voltage electricity facilities, computers, office equipment, and construction equipment.


JOB DESCRIPTION

SUMMARY:

Under general supervision, plans, schedules, conducts, and coordinates large and significant engineering projects and/or a number of small projects that are complex in nature and often functions as staff advisor and consultant by performing the following duties.


ESSENTIAL DUTIES AND RESPONSIBILITIES:

Provides the diverse and advanced engineering and project management expertise associated with large and high-profile projects and/or a number of small projects with many complex features

Leads or conducts performance, cost and scheduling studies/evaluations that require advanced and innovative techniques and/or the modifications of standard practices and precepts
Provides the operational areas with highly skilled and diversified expertise
Communicates engineering ideas, recommendations and evaluations to diverse internal and external audiences
Represents the company's interests in advanced engineering matters
Identifies and resolves broad technical and/or organizational issues affecting the company goals and objectives
Provides advanced technical support as a staff advisor or consultant to, and interacts with other associates
Applies extensive engineering expertise to improve or develop new standards
Provides advanced and often highly innovative technical direction and/or activity supervision to contractors and company personnel on an as-needed basis
Functions as a lead for staff engineers, professionals, and technicians and as appropriate, provides training


COMPETENCIES:

Extensive knowledge and proven ability to apply diverse engineering principles, practices and regulations and to perform economic and decision analysis studies of complex issues in areas including, but not limited to, generation, transmission, distribution, system planning, financial and regulatory issues, asset utilization, and environmental controls and regulations
Ability to read, interpret and apply national, state and local codes and standards (IEEE, ANSI, NEC, NESC, ACI, AISC, ASME, NACE, etc.)
Ability to translate electrical theory and physics to utility application for improving system reliability
Ability to make informed repair decisions following company protocols
Comfortable working in and around high voltage (up to 345kV) electrical facilities and equipment
Ability to forecast budgets
Demonstrated strong leadership skills, self-motivation, and advanced interpersonal skills


QUALIFICATIONS:


MINIMUM EDUCATION AND/OR EXPERIENCE:

Bachelors Degree in Engineering from a college/university accredited by the Accreditation Board for Engineering and Technology, Inc. (ABET) with five to seven years of experience.
Masters Degree in Engineering is preferred.


CERTIFICATES, LICENSES, AND REGISTRATIONS:

Professional Engineers License is preferred.
Must possess current, legally valid drivers license and meet the Company's driving record requirements.


COMMUNICATION SKILLS

Ability to read and interpret documents
Ability to write routine reports, correspondence, speeches, and make presentations
Ability to speak effectively before groups of customers, employees, and managers of the organization


COMPUTER SKILLS:

In-depth knowledge of personal computers including demonstrated proficiency with electrical engineering design program
In depth knowledge of word processing, database, and spreadsheet software


ANALYSIS AND PROBLEM-SOLVING ABILITY:

Ability to apply common sense understanding to carry out complex instructions furnished in written, oral, or diagram form. Ability to deal with complex problems involving several concrete variables in complicated situations.


PHYSICAL DEMANDS:

This position requires periods of frequent sitting, standing, walking, and exposure to outside elements, lifting (50 pounds or under), crouching, bending, climbing and working at various heights. Protective equipment required: hard-hat, safety glasses and hearing protection.


WORK ENVIRONMENT:

Time will be divided between office and field, with a majority of time in the office. Work will be around high voltage electricity facilities, computers, office equipment, and construction equipment.


SAFETY AND ADA STATEMENT

Safety Statement:

Safety is a core value at (TXNM Energy/PNM/TNMP) and our vision, "everyone goes home safe", reflects our commitment to promoting an environment conducive to learning, improving and building safety practices. Our safety value is built upon the belief that every employee deserves to work in an environment free from harm.

Americans with Disabilities Act (ADA) Statement:

If you require assistance with the job application process due to a disability, please contact HR ADA Analyst, at 505-241-4627.

Trending Jobs

company-logo

Assistant General Manager, Navy Yard Electric Utility

Job TypeFull-time
Salary
$108000 - $108000
Philadelphia, Pennsylvania
26 days ago
company-logo

Electrical Engineer

Dudley Staffing
Job TypeFull-time
Salary
$55 - $75
Canonsburg, Pennsylvania
4 months ago
company-logo

Division Order Analyst

Job TypeFull-time
 
Dallas, Texas
17 days ago
company-logo

Accounts Payable Clerk

Job TypeFull-time
Salary
$65000 - $65000
Dallas, Texas
27 days ago
DM

Apprentice Lineman

Delta Montrose Electric Association
Job TypeFull-time
 
Montrose, CO
about 1 month ago
company-logo

contract landman

HPS Oil & Gas Properties
Job TypeFull-time
 
Lafayette, Louisiana
3 months ago
company-logo

Attorney

Toeppich & Associates
Job TypeFull-time
 
Houston, Texas
about 1 year ago
company-logo

Oil and Gas Land and Title Analyst - SAM Associate II

Bank of America
Job TypeFull-time
 
Dallas, Texas
about 2 months ago
company-logo

Senior Landman

Greenlake Energy
Job TypeFull-time
 
Austin, Texas
about 2 months ago
company-logo

Foundry Professionals

Penticton Foundry
Job TypeFull-time
 
British Columbia, Canada
19 days ago
company-logo

Apprentice Lineman

Southern Pine Electric
Job TypeFull-time
 
Brandon, MS
about 1 month ago
company-logo

Electrical Designer

Dudley Staffing
Job TypeFull-time
Salary
$45 - $60
Canonsburg, Pennsylvania
4 months ago
company-logo

Contracts Administrator

Third Coast
Job TypeFull-time
Salary
$70000 - $85000
Houston, Texas
about 1 month ago
company-logo

Title Landman

Sustain Land Services
Job TypeFull-time
 
Norman, Oklahoma
2 months ago
company-logo

Deckhand

Ballard Marine Construction
Job TypeFull-time
 
Bradenton, FL
21 days ago
PS

Screen Printing Operator

Providence screen printing
Job TypePart-time
Salary
$39520 - $41600
East Providence, RI
26 days ago
company-logo

Apprentice Lineman

N Line Electric
Job TypeFull-time
Salary
$68640 - $106080
Longmont, CO
14 days ago
company-logo

HSE Operations Manager

ProPetro Services, Inc
Job Typefull_time
 
Midland, TX
3 days ago
company-logo

Scada Controller, Level 1-5

Kinder Morgan
Job TypeFull-time
 
Snyder, TX
26 days ago
company-logo

Manufacturing Technician Core Finishing 2nd Shift

Siemens Energy
Job TypeFull-time
 
Gibsonton, FL
27 days ago