Compression Specialist

LocationTexas, GA
Job TypeFull-time

About This Job


Entity:


Production & Operations


Job Family Group:


Project Management Group


Job Description:

The Compression Specialist, working under general supervision, is responsible for optimizing compression including tracking production and data to determine efficiency of units - run times, load, and sizing. The role works with our Production Superintendent, Production Foremen and vendors to ensure proper compressors in place for the volumes associated with each well pad and performs routine assignments such as maintaining files/records, performing calculations, and gathering/tabulating data. The role prepares, maintains, and submits reports and records of daily, weekly, and monthly compressor operational, maintenance, and cost information. The role oversees installation of new and replacement compression equipment and conducts operational readiness review prior to start up. The role is pivotal in optimizing compression systems, enhancing operational efficiency, and ensuring equipment reliability.


Key Responsibilities

Monitors and reports on daily run times of compressors (primarily gas lift and VRU compressors), supports in troubleshooting problems, and assists in overseeing contractors installing and maintaining compression equipment on the organization's locations.
Works under general supervision and performs routine assignments such as maintaining files/records, performing calculations, and gathering/tabulating data.
Demonstrates consensus building demeanor with management, peers, direct reports, and contractors to advance operational efficiencies and is able to understand and articulate the supporting reasons and value of processed and priorities.
Participates in proactive safety activities, demonstrates EHS commitment, and identifies opportunities for modifications to routine tasks, showcasing awareness of continuous improvement principles.
Supports in establishing and maintaining mechanisms and processes to track inventory and location of all compression equipment and in reviewing contracts with Supply Chain to ensure consistent terms and conditions.
Provides input to execute plans for business objectives, performs compression-specific risk mitigation tasks, and receives mentoring for knowledge transfer and skill development.
Assists in maintaining compliance, in conjunction and coordination with the Foremen and EHS department for all regulatory, environmental, and safety issues and helps in scheduling and facilitating vendor reliability and KPI meetings.
Demonstrates a general working knowledge of business principles and industry practices, evaluates, and recommends solutions to business and technical problems, and organizes workload consistently and efficiently.
Develops an understanding of terminology, applications, and standard procedures for performing the engineering technician job function and is capable of climbing stairs, ladders, and various equipment.
Trains newly hired and/or less experienced operators regarding compression equipment and possesses intermediate and advanced skills in the application of relevant software packages.
Reviews and evaluates MA data on a weekly basis and shares data results with vendors during KPI meetings or more frequently as required.


Education

High School Diploma/General Education Diploma (GED)/Higher Secondary education and/or commensurate work experience is required. Associate’s Degree in Engineering, Business Administration or any other related discipline is preferred.


Experience

3+ years of relevant experience, preferably in E&P Operations specializing in areas such as Maintenance and/or Operations of Compression Equipment. or a related field. Industry experience is preferred.


Skills & Competencies

Oral & Written Communication
Results Oriented
Strong Business Acumen Focusing on Value
Recordkeeping, Data Management, and Cost/Budget Tracking
Embodies a Culture of Safety First and Leads Safety Standards
Expert in Compression Equipment Operation & Maintenance


Location: Cuero/Victoria, TX


Physical Requirements:


Lifting Abilities:

Lift with 2 hands from floor to knuckles: 50 lbs x 2 (with 12 sec rest intervals between lifts)
Lift with 2 hands from floor to waist: 50 lbs x 2 (with 12 sec rest intervals between lifts)
Lift with 2 hands from floor to shoulders: 20 lbs x 2 (with 12 sec rest intervals between lifts)
Lift with 2 hands from floor to crown: 20 lbs x 2 (with 12 sec rest intervals between lifts)


Pushing and Pulling Abilities:

Push horizontally with hands placed between waist and mid-chest level to generate a peak force of 110 lbs with two hands x 3.
Pull horizontally with hands placed between waist and mid-chest level to generate a peak force of 110 lbs with two hands x 3.


Carrying Abilities:

Carry with 2 hands at self-selected height: 50 lbs for a distance of 50 feet x 2; self-paced.


Stair / Ladder Climbing Abilities:

Stair Climb: Climb up and down a total of 40 steps, self-paced
Ladder climb Test: Climb up and down 10 rungs, self-paced


Agilities:

Stooping and Twisting: From standing, perform alternate toe touches x 3 to each side, self-paced but continuous.
Test recipient should reach toward his/her toes on opposite side as far as possible but actual touching of toes not required,


Kneeling:

From standing, kneel on one knee, return to full standing and then kneel on opposite knee. Repeat kneeling test x 3, each knee, self-paced but continuous,


Sustained Squatting:

From standing, lower body into a functional squat position. Hold the squat position for 30 seconds and then stand.


Repetitive Squatting:

Repeat squats x 3 reps, self-paced, no hold time at end range.

We offer a reward and wellbeing package to enable your work to fit with your life. These can include, but not limited to, access to health, vision and dental insurance, flexible working schedule, paid time off policy, discretionary annual bonus program, long-term incentive program, and a generous 401K matching program. How much do we pay (Base)? $119,000-$141,000.

Note that the pay range listed for this position is a good faith and reasonable estimate of the range of possible base compensation at the time of posting. 


Travel Requirement

Up to 25% travel should be expected with this role


Relocation Assistance:


This role is not eligible for relocation


Remote Type:

This position is not available for remote working


Skills:

Change control, Commissioning, start-up and handover, Conflict Management, Construction, Cost estimating and cost control (Inactive), Design development and delivery, Frameworks and methodologies, Governance arrangements, Performance management, Portfolio Management, Project and construction safety, Project execution planning, Project HSSE, Project Leadership, Project Team Management, Quality, Requirements Management, Reviews, Risk Management, Schedule and resources, Sourcing Management, Stakeholder Management, Strategy and business case, Supplier Relationship Management


Legal Disclaimer:

We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, socioeconomic status, neurodiversity/neurocognitive functioning, veteran status or disability status. Individuals with an accessibility need may request an adjustment/accommodation related to bp’s recruiting process (e.g., accessing the job application, completing required assessments, participating in telephone screenings or interviews, etc.). If you would like to request an adjustment/accommodation related to the recruitment process, please contact us.

If you are selected for a position and depending upon your role, your employment may be contingent upon adherence to local policy. This may include pre-placement drug screening, medical review of physical fitness for the role, and background checks.

Similar Jobs

company-logo

Compression Specialist

bp
Job TypeFull-time
 
Texas, GA
6 days ago
company-logo

Compression Technician

Certarus
Job TypeFull-time
 
Watford City, ND
2 days ago
company-logo

Compression Technician

Diversified Energy Company
Job TypeFull-time
 
Brenton, WV
14 days ago
company-logo

Compression Technician

Diversified Energy Company
Job TypeFull-time
 
Brenton, WV
15 days ago
company-logo

Compression Technician

Diversified Gas & Oil
 
Brenton, WV
15 days ago
company-logo

Compression Service Technician

J-W Power Company
Job TypeFull-time
 
Cadiz, OH
7 days ago
company-logo

Compression Service Technician

J-W POWER COMPANY
Job TypeFull-time
 
Cadiz, OH
15 days ago
company-logo

Compression Service Technician

J-W POWER COMPANY
Job TypeFull-time
 
Carlsbad, NM
20 days ago
company-logo

Compression Service Technician

J-W Power Company
Job TypeFull-time
 
Carlsbad, NM
23 days ago
company-logo

Compression Service Technician

J-W Power Company
Job TypeFull-time
 
Bridgeport, WV
23 days ago
company-logo

Compression Service Technician (Field/Shop)

J-W Power Company
Job TypeFull-time
 
Mineral Wells, TX
7 days ago
company-logo

Compression Service Technician (Field/Shop)

J-W POWER COMPANY
Job TypeFull-time
 
Mineral Wells, TX
8 days ago
company-logo

Sr. Compression Engineer

ExxonMobil
 
Midland, TX
21 days ago
company-logo

Compression & Controls Technician

Fortis BC
Job TypeFull-time
 
Kamloops, BC
7 days ago
company-logo

Compression & Controls Technician

Fortis BC
Job TypeFull-time
 
Kitchener, BC
21 days ago
company-logo

Operations Manager, Compression

VoltaGrid
Job TypeFull-time
 
Midland, TX
28 days ago
company-logo

Operations Manager, Compression

VoltaGrid, LLC
Job TypeFull-time
 
Midland, TX
29 days ago
company-logo

Compression Service Technician - 14/14 Rotator

J-W Power Company
Job TypeFull-time
 
Casper, WY
24 days ago
company-logo

Mechanical Specialist

Kinder Morgan
Job TypeFull-time
 
Franklinton, LA
10 days ago
company-logo

Mechanical Specialist

Kinder Morgan, Inc.
Job TypeFull-time
 
Franklinton, LA
10 days ago

Trending Jobs

company-logo

Nuclear Technical Intern - Mid Atlantic

Constellation
Job TypeInternship
 
Lusby, MD
24 days ago
company-logo

Apprentice Lineman

Brink Constructors, Inc.
Job TypeFull-time
 
Rapid City, SD
23 days ago
company-logo

Deckhand (Houston)

John W. Stone Oil Distributor, LLC
 
Houston, TX
24 days ago
company-logo

Electrical Engineer

Dudley Staffing
Job TypeFull-time
Salary
$55 - $75
Canonsburg, Pennsylvania
3 months ago
company-logo

Director, Financial Planning & Analysis - Energy (Enterprise)

Pilot Thomas Logistics
Job TypeFull-time
 
Grapevine, TX
24 days ago
company-logo

Solar Electrician

MN8 Energy
Job TypeFull-time
 
California, United States
22 days ago
company-logo

Quality Engineer

Jedco Inc.
Job TypeFull-time
 
Grand Rapids, MI
18 days ago
company-logo

Gas Foreman

Peak Utility Services Group
Job TypeFull-time
 
Lawton, OK
23 days ago
company-logo

Sr. Polymer Scientist

ExxonMobil
Job TypeFull-time
 
Baytown, TX
22 days ago
company-logo

Apprentice Lineman I

San Patricio Electric Cooperative, Inc.
Job TypeFull-time
 
Sinton, TX
8 days ago
company-logo

Apprentice Line Worker I

Tampa Electric
Job TypeFull-time
 
Ruskin, FL
30 days ago
company-logo

contract landman

HPS Oil & Gas Properties
Job TypeFull-time
 
Lafayette, Louisiana
about 2 months ago
company-logo

Finishing Helper Entry Level- Dayshift

Bonnell Aluminum
Salary
$41600 - $41600
Carthage, TN
18 days ago
SD

Service Manager

Supertech Diesel Truck Specialists
Job TypeFull-time
 
Langley, BC
21 days ago
company-logo

Meter Technician

ONEOK
Job TypeFull-time
 
Odessa, TX
24 days ago
company-logo

Apprentice Power Lineman

Proline Power Corp.
Job TypeFull-time, Apprenticeship
 
Red Deer, AB
28 days ago
SD

Service Manager

Supertech Diesel Truck Specialists
Job TypeFull-time
 
Nanaimo, BC
21 days ago
company-logo

Senior Landman

Greenlake Energy
Job TypeFull-time
 
Austin, Texas
15 days ago
company-logo

Senior Investigator

Dominion Energy
Job TypeFull-time
 
Norfolk, VA
24 days ago
company-logo

Assembler/Production

Uptalent
Job TypeContract
Salary
$37440 - $49920
Oklahoma City, OK
17 days ago