Enterprise Products

Technician, Measurement

Manvel, TX

On-site

Oil and Gas

About This Job

Enterprise Products Partners L.P. is one of the largest publicly traded partnerships and a leading North American provider of midstream energy services to producers and consumers of natural gas, NGLs, crude oil, refined products and petrochemicals. Our services include: natural gas gathering, treating, processing, transportation and storage; NGL transportation, fractionation, storage and import and export terminals; crude oil gathering, transportation, storage and terminals; petrochemical and refined products transportation, storage and terminals; and a marine transportation business that operates primarily on the United States inland and Intracoastal Waterway systems. The partnership’s assets include approximately 50,000 miles of pipelines; 260 million barrels of storage capacity for NGLs, crude oil, refined products and petrochemicals; and 14 billion cubic feet of natural gas storage capacity.

The Measurement Technician is responsible for the measurement of high and low pressure gathering systems. The Measurement Technician is also responsible for:

•

Installing, programming and calibrating EFM Flow computers, change orifice plates and transmitters.

•

Calculating volume rates and sizes of orifice plates to set flow rates.

•

Collecting gas and liquid samples.

•

Installing, operating and maintaining gas and liquid sampling systems.

•

Installing, programming, maintaining and calibrating portable and stationary gas or liquid chromatographs.

•

Acquiring information on site using stain tubes or electronic devices for obtaining H2S, CO2, O2, water content and nitrogen.

•

Developing and maintaining meter test schedules,

•

Installing equipment from drawings, schematics and manufacturer's manuals.

•

Troubleshooting and rectifying equipment failures using voltmeters and test equipment.

•

Planning, scheduling and coordinating work with other departments to ensure timely completion of equipment installation and repair.

•

Installing, maintaining and troubleshooting EFM radio telemetry system both full duplex and spread spectrum systems.

•

Installing, maintaining and troubleshooting process controls, regulation equipment & relief valves.

•

Operating appropriate PC software.

Qualifications

The successful candidate will meet the following qualifications:

•

High School diploma or G.E.D. equivalent is required.

•

Technical certification or equivalent training in a mechanical environment or energy related field preferred.

•

Valid driver's license with acceptable driving record is required.

•

Possession of a strong commitment to personal and job safety.

•

Must demonstrate mechanical aptitude and dexterity in the use of tools and equipment.

•

Must be able to perform basic mathematical calculations and possess basic computer skills including spreadsheet and word processing applications.

•

Must have good decision making skills and a strong work ethic.

•

Ability to work independently as well as the ability to maintain and promote good working relationships within a team environment.

•

Ability to assume responsibility, be flexible, perform duties and handle multiple tasks under potentially stressful and/or hazardous conditions.

•

Must have reliable means of contact for call-out purposes; willingness to work overtime and handle call-outs. Must live or relocate to within 1 hour response time of job assignment.

•

At least 3 years previous experience in the measurement field is desired.

•

Must have understanding of and possess ability to use computers and understand and interpret equipment manuals.

•

Will be required to provide understandable and legible reports.

•

Must have a history of being dependable and reliable, take pride in a job well done, and enjoy working hard.

•

Must have good organizational skills, good customer relation skills.

•

Must possess good verbal and written communication skills with the ability to interface with land owners and other corporate and field personnel.

•

Ability to work indoors and outdoors; in and around industrial and electrical equipment.

•

Required to climb about equipment and work in confined areas and at various heights (i.e. tanks, between compressors, vessels).

•

Ability to work in a standing, sitting, lying down, crouched or kneeling position.

•

Ability to work in temperature extremes due to weather conditions and operating equipment.

•

Must be able to wear special safety equipment while working and be able to lift and put on emergency breathing apparatus and/or protective equipment.

•

Required to routinely react to visual, aural and other signals; including alarms and instructions.

•

Required to visually inspect work.

•

Must be able to regularly bend, stoop, and move from ground to higher levels; raise/lift up to 50 lbs. from ground level, manually transport a load up to 75 lbs., and apply up to 100 foot pounds of torque.

•

Must have ability to get in and out of vehicles regularly and ride over rough roads.

•

May interface with land owners, pipeline companies, producers, corporate contacts and other field personnel.

Primary Location: USA-Texas-Manvel

Shift: Day Job

Travel: Yes, 10 % of the Time

Unposting Date: Ongoing

Organization: Operations

Job: Measurement

Job Level: Individual Contributor

Technician, Measurement

About This Job

Qualifications

Primary Location: USA-Texas-Manvel

Shift: Day Job

Unposting Date: Ongoing

Organization: Operations

Job: Measurement

Job Level: Individual Contributor

Similar Jobs

Trending Jobs

Electrical Engineer

Division Order Analyst

Professional Landman

Accounts Payable Clerk

Division Order Landman

Business Analyst – Accounting

contract landman

Oil and Gas Land and Title Analyst - SAM Associate II

Attorney

Title Landman

Landman

Senior Landman

Title Reviewer

contract Landman

Oil and Gas Title Attorney

Electrical Designer

Civil/Structural Designer

Data Analyst

Software Integrations Developer

Senior Division Order Analyst