Tallgrass Energy

Measurement Technician

Douglas, WY

Full-time

About This Job

MEASUREMENT TECHNICIAN PRIMARY PURPOSE:

Responsible for the installation, maintenance, and accuracy of natural gas measurement and control facilities. This includes flow computers, chromatographs, contaminant analyzers, SCADA (Supervisory Control and Data Acquisition) equipment, regulators, transducers, electronic and pneumatic controllers, relief valves, ultrasonic meters, rotary meters, turbine meters, positive displacement meters, and valves. Performs frequent audits of custody transfer and control data. Required to respond to after-hour “call-outs” due to equipment and/or operational problems and must be willing to work overtime on an as-needed basis.

•

Must be a self-starter and highly motivated.

•

Install, maintain & operate, measurement equipment

•

Detect measurement errors and correct volumes as needed and provide supporting documentation.

•

Monitor assigned area measurement system, and ensure all corrections and proper qualities are applied.

•

Assess all facets of assigned facilities to ensure accurate measurement while maintaining the company “Lost and Unaccounted For” gas with a high degree of ownership within the established corporate goals.

•

Perform audits of custody transfer and control data when necessary.

•

Interpret and apply electrical and electronic schematics about EFM (Electronic Flow Measurement) and measurement electronics.

•

Responsible for the general upkeep and maintenance of all facilities and equipment as needed.

•

Oversee the construction and/or maintenance activities performed by third parties.

•

Complete appropriate documentation and paperwork.

•

Perform all work in compliance with Company standards, procedures, and regulatory and tariff requirements.

•

Ability to troubleshoot pneumatic, electronic, and electrical equipment and controls.

•

Ability to perform basic mechanical work associated with natural gas facilities.

•

Participate in federal inspections.

•

Ability to actively support the company safety program.

•

Identify, report, and correct safety and environmental concerns.

•

Maintain a high regard for personal safety, for the safety of company assets and employees, contractors, and the general public.

•

Work performance strives for operational excellence focusing on safety, compliance, efficiency, environmental awareness, and superb technical skills.

•

Must be able to work in extreme weather conditions and with minimal direct supervision.

•

Must be available for and provide an emergency response after regular business hours which may require carrying a personal cell phone.

•

Strong analytical and troubleshooting skills.

•

Must be proficient in computer software applications including Microsoft Office (Word, Excel, Windows XP, and Windows 7), and be able to manipulate large spreadsheets and databases.

•

Deal with a wide variety of people with tact, courtesy, and professionalism.

•

Speak, both in person and by telephone, using a high level of verbal skills, and listen carefully.

•

Maintain regular, dependable attendance and a consistently high level of performance.

•

Will work non-traditional hours as needed.

•

Other daily, weekly, monthly or special project duties as identified and defined.

•

Other duties as assigned.

MEASUREMENT TECHNICIAN JOB REQUIREMENTS:

Minimum requirements:

Education:

•

Associates degree in a technical field or related discipline.

•

Relevant work experience that has developed equivalent technical/measurement-related skills may be considered instead of a degree.

Experience/Specific Knowledge:

•

Basic math skills (addition, subtraction, multiplication, division, fractions, decimals).

•

Knowledge of electronic test instruments.

•

Knowledge of gas chromatography.

•

Familiarity with AGA, API, and GPA measurement standards.

•

Good record of safe work practices.

•

Familiarity with DOT regulations

•

Knowledge and experience with safe handling practices of products (gas and liquids).

•

Ability to troubleshoot pneumatic, electronic, and electrical equipment and controls.

•

Experience with mechanical, pneumatic, and electronic equipment used in gas measurement and control.

•

Intermediate proficiency level in MS Office applications that may include but are not limited to Excel, Word, Access, PowerPoint, and Outlook.

Certifications, Licenses & Registrations:

•

Must be required to achieve and maintain certifications as required to perform job duties and applicable to the job classification.

•

Completion of any site-specific technical training may be applicable.

•

Must possess and maintain a valid driver’s license and a driving record satisfactory to the company and its insurers (for travel).

Competencies, Skills & Abilities:

•

Must respond to, and address, call-outs, and emergencies during and after regular business hours including after dark hours, which require carrying a communication device.

•

Depending on location and workload, travel will be required.

•

Overtime may be required and is anticipated.

•

Good verbal and written communication skills.

•

Customer focus.

•

Interface directly with customers and provide a high degree of satisfaction and confidence that accurate measurement is taking place.

•

Must be able to perform all essential and marginal functions of the job.

•

Must be able to work with a team, take direction from management, adhere to required work schedules, focus attention on details, and follow work rules.

•

Ability to successfully perform multiple tasks with strict deadlines.

•

Ability to organize and prioritize daily work.

•

Job level commensurate with experience and skill sets; position will be filled depending on qualifications, experience, and skillsets of the successful candidate.

Physical Demands:

All of the physical requirements listed below are those that may be necessary for an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

•

Sitting; standing; walking or moving throughout the facility; driving; talking; seeing

•

(specific vision abilities required by this job include close vision, distance vision,color vision, peripheral vision, depth perception, and ability to adjust focus); hearing; feeling; bending or stooping; squatting or crouching; reaching; kneeling; pushing; pulling; lifting up to 50 lbs.

•

Minimal safety hazards; general office working conditions.

•

Must be able to sit for prolonged periods.

•

The employee is regularly required to use hands to type, touch, handle, or feel. The employee is required to talk and hear. The employee is frequently required to stand and reach with hands and arms. The employee is occasionally required to walk and climb or balance. The employee must regularly lift and /or move up to 10 pounds and occasionally lift and/or move up to 50 pounds.

•

Physical requirements include but may not be limited to climbing to and working from elevated platforms, excavated areas, safely negotiating ladders, stairs, uneven surfaces, walkways, etc.

•

Will be required to maneuver 100-pound products with the assistance of safety devices such as bottle carts or hand carts.

•

May work in low-lit areas

Working Conditions:

•

Living environs may be negotiable and will be relevant to the work location.

•

Required to work outside in all environmental conditions.

•

Required to carry a cell phone and be available to respond during working and non working hours.

•

The successful candidate will be required to clear a drug screen and a complete background check, including a credit report for certain positions, after an offer has been extended and before being employed.

Supervisory Responsibility:

•
None

PREFERRED EDUCATION, EXPERIENCE, CERTIFICATIONS, COMPETENCIES, SKILLS,

& ABILITIES:

Above the minimum requirements, not required but advantageous in this position:

•

Experience with electronic flow measurement computers, gas chromatographs, gas quality analyzers, SCADA equipment, electronic and pneumatic controllers, regulators, OPP, and transducers.

•

Working knowledge of the overall natural gas industry pipelines, compression, and peripheral equipment.

•

Working knowledge of AGA, API, and GPA standards.

•

Working knowledge of National Electrical Code philosophies and installation requirements.

•

Experience with computer interface software, networking, and data file management

Other responsibilities:

•

The above statements describe the general nature and level of work being performed. This position may perform other duties as assigned.

Measurement Technician

About This Job

MEASUREMENT TECHNICIAN PRIMARY PURPOSE:

MEASUREMENT TECHNICIAN JOB REQUIREMENTS:

Minimum requirements:

Education:

Experience/Specific Knowledge:

Certifications, Licenses & Registrations:

Competencies, Skills & Abilities:

Physical Demands:

Working Conditions:

Supervisory Responsibility:

•None

PREFERRED EDUCATION, EXPERIENCE, CERTIFICATIONS, COMPETENCIES, SKILLS,

& ABILITIES:

Other responsibilities:

Similar Jobs

Trending Jobs

Assistant General Manager, Navy Yard Electric Utility

Electrical Engineer

Accounts Payable Clerk

Apprentice Lineman

Attorney

Apprentice Lineman I

Associate Attorney

contract landman

Oil and Gas Land and Title Analyst - SAM Associate II

Lineworker Apprentice I

2025 Summer Internship - Engineering

Senior Landman

Contracts Administrator

Natural Gas Utility Laborer

JOURNEYMAN LINEMAN - WOODLAND PARK

Electrical Designer

Tank Wagon Driver - CDL B

Landman

Operator Assistant Trainee - Frac Acid

Manufacturing Technician Core Finishing 2nd Shift

•
None